Product ID:SPEEDHIDE LATEX BLOCK FILLER, 6-7
MSDS Date:06/05/1990
FSC:8010
NIIN:00N037061
MSDS Number: CFLPQ

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15272-0001
US

Emergency Phone: 304-643-1300; 412-434-3131

Info Phone: 412-492-5335; 216-671-0053

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

DETERMINE TYPE OF AIRBORNE CONTAMS AGAINST WHICH

RTECS: 9999999ZZ

BELOW STATED LIMIT & TO REMOVE DECOMP PRODS DURING

RTECS: 9999999ZZ

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 2-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

CLAY (KAOLIN); (ALUMINUM SILICATE)

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST

1); (CALCIUM CARBONATE)

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 35-40%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 10-15%

OSHA PEL N/K

ACGIH TLV: N/K

WATER; (DEIONIZED WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 15-20%

OSHA PEL N/K

ACGIH TLV: N/K

DISTILLATES (PETROLEUM), HYDROTREATED MIDDLE; (HYDROTREATED

CAS: 64742-46-7

RTECS: JN9379645

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 10-15%

OSHA PEL N/K

ACGIH TLV: N/K

TITANIUM DIOXIDE DUSTS FROM COATINGS IS

RTECS: 9999999ZZ

SIGNIFICANT HAZARD FOR MAN.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL IF
SWALLOWED. EYE CONT:CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION
& VISUAL DISTURBS MAY INDICATE EXCESSIVE CONT. SKIN CONT:MAY CAUSE
MOD IRRIT. DRYNESS, ITCH, CRACKING, BURNING, REDNESS & SWELL ARE
CNDTNS ASSOC W/EXCESSIVE CONT. INHAL:VAP & SPRAY MIST MAY BE
HARMFUL IF (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:INHALED. CHRONIC:AVOID LONG TERM &
RPTD CONT. THIS PROD CNTNS TITANIUM DIOXIDE. ANIMALS INHALING
MASSIVE QTYS OF TITANIUM DIOXIDE DUST IN LONG-TERM STUDY DEVELOPED
LUNG TUMORS. STUDIES W/HUMA NS INVOLVED IN MANUFACTURE OF THIS
PIGMENT INDICATE NO INCR RISK OF CANCER FROM EXPOS. POTNTL FOR
INHAL OF (ING 9)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:DO NOT INDUCE VOMIT. EYES:FLUSH IMMED W/PLENTY OF
WATER FOR AT LST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR.
APPLY ARTF RESP & O THER SUPPORTIVE MEASURES AS REQD. NOTE:IF ANY
OF FOLLOWING OCCUR DURING/FOLLOWING USE OF THIS PROD CONT POIS CTL
CTR, EMER ROOM/MD IMMED. HAVE MSDS INFO AVAIL:INGEST; EXCESSIVE
EXPOS TO CORR (SUPDAT)

Flash Point Method:PMCC
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA (SUPP
DATA)
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO THE BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME
HEAT.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSORB MAT L & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS IIIB COMBUSTIBLE LIQUIDS.
Other Precautions:PROTECT FROM FREEZING. IF THIS MATERIAL IS PART OF A
MULTIPLE COMPONENT COATING SYSTEM, READ MSDS(S) FOR OTHER
COMPONENT(S) BEFORE BLENDING AS THE RESULTING MIXTURE MAY HAVE
HAZARDS OF ALL OF ITS PART S.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CONTROLS, VAP EXHST/FRESH AIR ENTRY. NIOSH APPRVD (TC-23C-)
PAINT SPRAY/AIR SUPPLIED (TC-19C-) RESPS MAY ALSO REDUCE EXPOS.
READ RESP MFR'S INSTRUCTIO NS & LITERATURE CAREFULLY TO (ING 11)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMS, LEL(ING 12)
Protective Gloves:NITRILE, NEOPRENE OR LATEX GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:ANSI APPROVED EYE WASH FOUNTAIN & DELUGE
SHOWER . WEAR PROTECTIVE CLOTHING, INCLUDING IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA:CLASS IIIB COMBUST LIQ FIRES. FIRE FIGHT
PROC:AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED,
FOG NOZZ ARE PREF. HAZ DECOMP PROD:FUMES INCL:CARBON MONOXIDE,
FORMALDEHYDE. FI RST AID PROC:MATL; PERSISTENT SKIN/EYE IRRIT/BRTHG
DFCLTIES. EYE PROT:& FULL LENGTH FACESHIELD .

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17.3
Vapor Density:HVR/AIR
Spec Gravity:1.58
Evaporation Rate & Reference:33 (BUOAC=100)
Solubility in Water:30.8%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF CHEMICAL
FAMILY & ANY SOLVS IN INGS.
Percent Volatiles by Volume:75.8

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/THIS PROD
MAY PRDCE (SUPP DATA)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT F ACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.